BASH Matrix effects
BASH Matrix effects
matrix (1).tar.gz
1.1 KiB

The paths are needing adjusted to work for your placement.
Two places to change. Number one is the file. You will see it below.
Number two is the file. The very first part.
Continue reading

 1,653 total views,  1 views today

There seem to be two that would work for you.

See my own(Seth Leedy’s) script for downloading GRC Security Now Podcasts!

A Windows script, and a BASH script which could be run on both Windows or L/Unix.
wget for windows, here.
BASH for Windows, here.

Copied from the g.securitynow newsgroup hosted on on date 2012-05-12 07:51 AM.
First message. Subject: “Little SN download script”

Hi all,

I wanted to download every episode of Security Now so I could go back and
listen to the back-catalogue (I've only been listening for a few months).

I threw together a little bash script to pull down all the episodes from I'm posting it here in case anyone else wants to use it (you
need wget):

As it states, he was publishing a script to download all Security Now episodes from the server.
This spawned a few messages of how to do it differently.
I am attempting to record all these different ways for future downloaders.
If you attempt this, set aside some space. As of 2012-05-16, approx: 11.8GB for HQ, 3.62GB for LQ.

James Womack:

echo "Download episodes $1 to $2:"
for ((ii=$1;ii<=$2;ii++))
printf -v number "%03d" $ii
echo "Episode: $number"

Hi James,

I also make use of scripting to maintain my SN-archive. Attached you will find the ones I made. Their function is very simple and as a default (void of argument) will “guesstimate”, i.e. make use of previously downloaded stuff and then based upon that derive “next” episode for download.

Big note: As you, I wrote these in a bit of a haste a few years back and I had absolutely no intention of the code being scrutinized by this community or anyone else for that matter. If you find the code yucky, or beyond, most likely I am already agreeing. If you see solutions in the code that could have been written a lot more clever, again it comes as no surprise at all.

Disclaimer: These scripts are not guaranteed to be failsafe, foolproof or even to work…but to my experience they usually do, at least in line with my initial description. These scripts are definitely not compatible with the intentions of the RIAA, MPAA or any other racketeering organization affiliated with Sony and the other legitimate crooks of our time and society. Then again, anything able to download whatever or for that matter technology in general beyond the abacus is probably incompatible along those lines…


# Initialization.
declare -i DISK_SPACE
declare -i DISK_SPACE_MIN="5000000"
declare -i EPISODE

# Output title.
echo "Security Now Downloader v0.7 (GRC)"

# Check disk space.
DISK_SPACE=$(df -T /data/disk1/ | grep disk1 | awk '{print $5}')
if [ "$DISK_SPACE" -le "$DISK_SPACE_MIN" ]; then
echo "Minimum amount of diskspace not available! Exiting."
exit 1

# Check argument and set episode.
if test "$1"; then
echo "Episode input: ${EPISODE}"
#EPISODE=$(ls -1 ./Audio/*.mp3 | tail -n 1 | grep -io "^sn-..." | grep -o "...$")
EPISODE=$(ls -1 ./Audio/*.mp3 | tail -n 1 | grep -io "[0-9][0-9][0-9]")
echo "Episode input missing, guesstimating: ${EPISODE}"

# Check length.
case "${#EPISODE}" in
1) EPISODE="00${EPISODE}" ;;

# Set episode filename and download.
echo "Downloading episode ${EPISODE}..."
echo " ${NETCAST_URL}"
wget -P ./Audio/ "$NETCAST_URL"
echo " (LQ) ${NETCAST_LQ_URL}"
wget -P ./Audio/ "$NETCAST_LQ_URL"
echo "...transcript ${NETCAST_TRANSCRIPT_URL}"
wget -P ./Transcripts/ "$NETCAST_TRANSCRIPT_URL"
echo "...done."

exit 0


# Initialization.
declare -i DISK_SPACE
declare -i DISK_SPACE_MIN="200000"
declare -i EPISODE

# Output title.
echo "Security Now Downloader v0.8"

# Check disk space.
DISK_SPACE=$(df -T /data/disk1/ | grep disk1 | awk '{print $5}')
if [ "$DISK_SPACE" -le "$DISK_SPACE_MIN" ]; then
echo "Minimum amount of diskspace not available! Exiting."
exit 1

# Check argument and set episode.
if test "$1"; then
echo "Episode input: ${EPISODE}"
EPISODE=$(ls -1 *.mp4 | tail -n 1 | grep -io "^sn0..." | grep -o "...$")
echo "Episode input missing, guesstimating: ${EPISODE}"

# Set episode filename and download.
echo "Downloading episode ${EPISODE}..."

echo "...done."

exit 0

Now gdb says to use this


and it spawned a large response thread.

Guy says:
Thanks for the information.
I use Windows – so curl is the tool for the task of topic.

curl -OL[001-352].mp3

Mark Cross adds:
Adding -N check timestamp and wont download existing files (if they haven’t changed) and -c to continue existing downloads:
echo wget -Nc${padding:${#i}}$i.mp3

A real ‘one liner bash command’ needs some artistic tweaking (for bash 3.1):
a=’printf %03d’ eval “wget -Nc{$($a 1)..$($a 25)}.mp3”

or (won’t mess with the environment vars set on present shell, for bash 3.1):
sh $(beg=1;end=25;a=’printf %03d’;eval “wget -Nc{$($a $beg)..$($a $end)}.mp3”)

and (for bash 4):
sh $(beg=001;end=025;eval “wget -Nc{$beg..$end}.mp3”)

maybe a bit too complex 😉

ObiWan says something interesting for Windows:

Well... if you're running windows, then you may also leverage the BITS
tool (Background Intelligent Transfer System); the critter integrates
with the windows network stack and ensures that ongoing downloads won't
clogger your bandwidth; this means that BITS won't be the faster way to
download stuff but it will, for sure, be the less "impacting" one; you
probably won't even notice that it's fetching stuff

The cornerstone of such a thing would be a tool called "bitsadmin"

basically it's a cmdline interface to the BITS service; as for every
windows app/service, there are several ways to use it; the most simple
and straightforward one is the following

bitsadmin /transfer JOBX /download /priority normal d:\SN\sn-001.mp3

the above (single line) will create a job called JOBX, add it a file,
that is "sn-001.mp3", tell it to download the file to d:\SN and then,
immediately start the job in sync mode (just like entering "wget..."
from the cmdline) then... ok, there are other ways to use it; for
example, you may create background jobs which will run (and fetch the
desired files) and which, at end (ok or error) will call whatever
script/program or piece of code you want

The BITS subsystem is the one used by windowsupdate to fetch files and
while it isn't "fast" (not its purpose) I think it's worth exploring

ObiWan also came up with this and I think, right now anyways, this would be the best way to do it for Windows users:

The below will fetch all the episode from 001 to 100 (for…) and save
then in c:\sn the episode number is correctly aligned with zeroes by
that “%NBR:~-3%”; basically the code first adds 000 in front of the
number and then picks the rightmost 3 chars

@echo off
if not (%1)==() goto FETCH
for /L %%n IN (1,1,100) DO call %0 %%n
goto QUIT
set NBR=000%1
set NBR=%NBR:~-3%
bitsadmin /transfer J%RANDOM% /download /priority normal c:\sn\sn-%NBR%.mp3

 11,759 total views


In quite a few situations its preferred to have ssh keys dedicated for a service or a specific role. Eg. a key to use for home / fun stuff and another one to use for Work things, and another one for Version Control access etc. Creating the keys is simple, just use

ssh-keygen -t rsa -f ~/.ssh/ -C "Key for Word stuff"

Use different file names for each key. Lets assume that there are 2 keys, ~/.ssh/ and ~/.ssh/id_rsa.misc . The simple way of making sure each of the keys works all the time is to now create config file for ssh:

touch ~/.ssh/config
chmod 600 ~/.ssh/config
echo “IdentityFile ~/.ssh/” >> ~/.ssh/config
echo “IdentityFile ~/.ssh/id_rsa.misc” >> ~/.ssh/config

This would make sure that both the keys are always used whenever ssh makes a connection. However, ssh config lets you get down to a much finer level of control on keys and other per-connection setups. And I recommend, if you are able to, to use a key selection based on the Hostname. My ~/.ssh/config looks like this :

Host *.home.lan
  IdentityFile ~/.ssh/id_dsa.home
  User kbsingh

Host *.vpn
  IdentityFile ~/.ssh/
  User karanbir
  Port 44787

Host *
  IdentityFile ~/.ssh/id_rsa.d0
  User admin
  Port 21871

Ofcourse, if I am connecting to a remote host that does not match any of these selections, ssh will default back to checking for and using the ‘usual’ key, ~/.ssh/id_dsa or ~/.ssh/id_rsa

 831 total views